Go Back   Scion XD Forum > xD Modification > Engine/Performance

Engine/Performance All things engine and performance.


Reply
 
Thread Tools Display Modes
Old 09-24-2012, 11:49 AM   #81
wheeliesteve
Junior Member
 
Join Date: Sep 2012
Name: Enter your name or name you wish to be refered to as.
Posts: 9
Default
Originally Posted by XDevolution View Post
steve see the intake you made, thats how i started with a spectre filter and stock intake tract. if you really want a more noticable difference, the filter should ve been either a knn or like a aem dryflow. and see that rubber pipe with that awkward pole coming out of it right after the maf? you could actually replace it with a 22 degree bend pipe from autozone (located with all the intake parts) it not only looks more official it actually smooths out the airflow because there are no ridges in the pipe. just a suggestion.
Hey, thanks for the advice. I will definitely look into that. It seems like that pipe is 3 1/2" diameter. I think at my local autozone they only had those pipes you're talking about in 3" diameter but I will double check.
wheeliesteve is offline   Reply With Quote
Old 09-24-2012, 01:15 PM   #82
 
1sweetxd's Avatar
1sweetxd
Senior Member
Full Access Member
 
Join Date: Mar 2011
Location: Texas
Name: Evan
Age: 42
Posts: 217
Default
Originally Posted by wheeliesteve View Post
Hey, thanks for the advice. I will definitely look into that. It seems like that pipe is 3 1/2" diameter. I think at my local autozone they only had those pipes you're talking about in 3" diameter but I will double check.
if i'm not mistaken there is a rubber adapter that converts the tubing from 3" to 3 1/2"

i did my filter just like you but added the chrome bend pipe xdevolution was speaking of


__________________
2011 XD Amazon Green
1sweetxd is offline   Reply With Quote
Old 09-24-2012, 04:33 PM   #83
wheeliesteve
Junior Member
 
Join Date: Sep 2012
Name: Enter your name or name you wish to be refered to as.
Posts: 9
Default
Originally Posted by 1sweetxd View Post
if i'm not mistaken there is a rubber adapter that converts the tubing from 3" to 3 1/2"

i did my filter just like you but added the chrome bend pipe xdevolution was speaking of
Do you have a pic of your setup?
wheeliesteve is offline   Reply With Quote
Old 09-24-2012, 04:55 PM   #84
 
1sweetxd's Avatar
1sweetxd
Senior Member
Full Access Member
 
Join Date: Mar 2011
Location: Texas
Name: Evan
Age: 42
Posts: 217
Default
Originally Posted by wheeliesteve View Post
Do you have a pic of your setup?
yea i do. a couple of them. just go to my page and check out my picture album. got pictures of pretty much everything in there.


__________________
2011 XD Amazon Green
1sweetxd is offline   Reply With Quote
Old 09-24-2012, 05:01 PM   #85
wheeliesteve
Junior Member
 
Join Date: Sep 2012
Name: Enter your name or name you wish to be refered to as.
Posts: 9
Default
Originally Posted by 1sweetxd View Post
yea i do. a couple of them. just go to my page and check out my picture album. got pictures of pretty much everything in there.
That looks good! What did you do about the electronic piece or sensor that plugs into the tube before the filter?
wheeliesteve is offline   Reply With Quote
Old 09-25-2012, 08:20 AM   #86
 
1sweetxd's Avatar
1sweetxd
Senior Member
Full Access Member
 
Join Date: Mar 2011
Location: Texas
Name: Evan
Age: 42
Posts: 217
Default
Originally Posted by wheeliesteve View Post
That looks good! What did you do about the electronic piece or sensor that plugs into the tube before the filter?
i used the stock sensor and plug. i just bought the tube, filter and connectors from auto zone. everything else is stock


__________________
2011 XD Amazon Green
1sweetxd is offline   Reply With Quote
Old 09-27-2012, 04:57 PM   #87
XDevolution
Senior Member
Full Access Member
 
Join Date: Sep 2010
Name: Anthony
Age: 34
Posts: 223
Default
Originally Posted by wheeliesteve View Post
Hey, thanks for the advice. I will definitely look into that. It seems like that pipe is 3 1/2" diameter. I think at my local autozone they only had those pipes you're talking about in 3" diameter but I will double check.
The part u connect ur cone filter to is 3.5" your correct but the actual inner diamter of the mass airflow pipe is 2.38" you have to try and get a pipe as close in diameter as the maf pipe. Im running a 3" pipe now but im gonna reduce it to 2.5". Alot of the aftermarket companies do a stepped pipe set up. Theyll do 2.5"-2.38"-2.5". As the pipe diameter. A good intake to look at is the dc sport intake. Thats a great example to look at.


__________________
XD RS 1.0 =
XDevolution is offline   Reply With Quote
Old 10-03-2012, 09:52 AM   #88
wheeliesteve
Junior Member
 
Join Date: Sep 2012
Name: Enter your name or name you wish to be refered to as.
Posts: 9
Default
Originally Posted by XDevolution View Post
The part u connect ur cone filter to is 3.5" your correct but the actual inner diamter of the mass airflow pipe is 2.38" you have to try and get a pipe as close in diameter as the maf pipe. Im running a 3" pipe now but im gonna reduce it to 2.5". Alot of the aftermarket companies do a stepped pipe set up. Theyll do 2.5"-2.38"-2.5". As the pipe diameter. A good intake to look at is the dc sport intake. Thats a great example to look at.
Thanks for the information. I've been out of town on a little vacation and just got back. I'm going to try and make time to work on this project by the weekend. I'll let ya know how it turns out!
wheeliesteve is offline   Reply With Quote
Old 02-27-2014, 03:47 PM   #89
 
ermann's Avatar
ermann
Junior Member
 
Join Date: Feb 2014
Location: Delaware
Name: eric
Posts: 9
Default
Here's what I have guys. Ripped out the air box and put on a 3 1/2 inch Spectre filter. My buddy made me a mounting bracket real quick coming off the battery. Don't mind all the salt hopefully the cold weather will break and I can clean her up. Let me know what you guys think.

ResizedImage_1393532372997.jpg

IMG_20140227_151412_384.jpg
ermann is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump