So in browsing the usual sites i came across this http://toyotapartspeople.com/searchp...rcharger+-+A/T
i i was wondering since people are using the 1zz exhaust manifiold for turbo projects, if the intake manifold flanges would line up aswell? if so this would be a reasonablly priced boost in power : ) only thing is that like the 05+ corollas we would probably need to get an adapter for a throttle body : )
Last edited by misformartin; 02-25-2010 at 07:34 PM.
well the stock 1zz supercharger puts out 8 pounds... there was a guy in puerto rico running 10 pounds with no engine manegement and it lasted about a year : ) so im sure with some tuning 10 psi is probable
yah all someone would need to do would be to get a 1zz intake manifold gasket and a xd intake manifold gasket and compare them if they are the same diameter ports then we can use it : ) and all we would need would be a piggyback ecu and a belt then we can run this : )
haha all good gonna do some research : ) gonna go get a 1zz intake manifold gasket and compair it to the xd intake manifold gasket this weekend hopefully
alright so the supercharger will not bolt up without some modification.... the ports are the same but the bolt holes are different... : ( so thats a bust but you can get a new flang welded on the charger to make it bolt directly up to our block : ) so this is possible with a little work
alright so the supercharger will not bolt up without some modification.... the ports are the same but the bolt holes are different... : ( so thats a bust but you can get a new flang welded on the charger to make it bolt directly up to our block : ) so this is possible with a little work
how far off? like grab a drill and get to it? or weld on new metal and then start drilling?
you will need to weld on new metal... to the charger and cut off the mounting for the 1zz... but the ports match up : ) yaris sc wont work its a for a 1.5l motor and the ports wont line up guy with a yaris ts already tried haha
would be realatively easy... : ) you just need to trace your stock intake mani onto some metal and have it cut out : ) then have it welded to the 1zz supercharger : ) wiring it up is a whole different story haha