Scion XD Forum

Scion XD Forum (http://www.scionxdforum.com/forum/index.php)
-   TRDsparks.com (http://www.scionxdforum.com/forum/forumdisplay.php?f=30)
-   -   Injen CAI SXF Members Only! (http://www.scionxdforum.com/forum/showthread.php?t=300)

Tim.TRDSparks 11-11-2009 03:56 PM

Injen CAI SXF Members Only!
 
Exclusively for this forum only, I am going to run special pricing on Injen CAI!

Here is the polished knob:

http://www.trdsparks.com/displaypart...&parts_id=3066

Here is the black knob:

http://www.trdsparks.com/displaypart...&parts_id=3065


These CAI (Cold Air Intake) systems can be made in a SRI (Short Ram Intake) system as well.

These prices are too low for me to list, so please PM me on here. Thanks!

http://www.injen.com/Galleries/Produ...2104lrg(2).jpg

misformartin 11-11-2009 05:59 PM

this is a great intake system i have it on my gf xd so sick and polished makes a nice addition to your engine bay

Tim.TRDSparks 11-12-2009 01:12 PM

Thank you!

FBI 09-18-2010 11:27 PM

image
 
Do you have any photos of an actual installation in an xd?

If so could you post them?

Tim.TRDSparks 09-28-2010 12:06 PM

I have been searching everywhere and have not been able to find any pictures of it installed. I will keep searching and see if I come up with anything.

Arwen 09-29-2010 01:04 PM

Hope this helps, this was from the install on my xD:

http://img.photobucket.com/albums/v3...o/P1000157.jpg
http://img.photobucket.com/albums/v3...o/P1000151.jpg

FBI 09-29-2010 01:34 PM

Awesome
 
Thank You so much. Do you have it on the road yet? What is your initial impression? Did you have to fab anything for the install? Where will the air inlet be?

Again Awesome photos and thank you. I am really interested in this install.

CXTKRS1 09-29-2010 02:27 PM

Man it is such a toss up between this unit and the DC Sports model.

Tim.TRDSparks 09-29-2010 02:32 PM

In my personal opinion I have the Injen on my xB for about 5 years and never had a problem with it. I have had to change the filter once to an upgraded dry filter.

x2cafn8dx 09-30-2010 11:26 AM

wish it was in the cards right now, the black would look great

FBI 09-30-2010 09:40 PM

Quote:

Originally Posted by Tim.TRDSparks (Post 3039)
Exclusively for this forum only, I am going to run special pricing on Injen CAI!

Here is the polished knob:

http://www.trdsparks.com/displaypart...&parts_id=3066

Here is the black knob:

http://www.trdsparks.com/displaypart...&parts_id=3065


These CAI (Cold Air Intake) systems can be made in a SRI (Short Ram Intake) system as well.

These prices are too low for me to list, so please PM me on here. Thanks!

http://www.injen.com/Galleries/Produ...2104lrg(2).jpg

Do you get the same HP and Trq gains with the short ram setup?

Arwen 09-30-2010 09:56 PM

Quote:

Originally Posted by FBI (Post 8027)
Thank You so much. Do you have it on the road yet? What is your initial impression? Did you have to fab anything for the install? Where will the air inlet be?

Again Awesome photos and thank you. I am really interested in this install.

The sound is amazing, I'm extremely happy with that. As for power gains, I felt a very slight difference at higher rpms only. I think you will have no problem installing it *unless* you order the black one. The MAF won't fit probably due to the black finish paint, so you have to sand down the interior of the hole. Then with a little Vaseline you can sqeeze it in there. Several people had that problem and after they sanded it down it was fine. If you order the polished one you'll have no issues.

FBI 10-02-2010 12:54 PM

Quote:

Originally Posted by Arwen (Post 8043)
The sound is amazing, I'm extremely happy with that. As for power gains, I felt a very slight difference at higher rpms only. I think you will have no problem installing it *unless* you order the black one. The MAF won't fit probably due to the black finish paint, so you have to sand down the interior of the hole. Then with a little Vaseline you can sqeeze it in there. Several people had that problem and after they sanded it down it was fine. If you order the polished one you'll have no issues.

Thanks for the reply!

Has your mpg improved? I your opinion is it possible to use the fog light opening for an air inlet?

I bought the TRD air filter and it made a huge difference in engine sound. The engine sounds like a Cosworth now!

Arwen 10-04-2010 07:20 PM

Quote:

Originally Posted by FBI (Post 8057)
Thanks for the reply!

Has your mpg improved? I your opinion is it possible to use the fog light opening for an air inlet?

I bought the TRD air filter and it made a huge difference in engine sound. The engine sounds like a Cosworth now!

I believe I did gain some mpg's, but I can't say for sure since my roof rack arrived shortly after. I'm still averaging 30-32 in a mix of city/highway, and this is with rims, drop, and a roof rack.

As for the hole in the fog light opening, I don't see why not but wouldn't look too pretty imo. I think it gets decent air flow where it is now really.

FBI 10-06-2010 05:43 PM

Quote:

Originally Posted by Tim.TRDSparks (Post 8030)
In my personal opinion I have the Injen on my xB for about 5 years and never had a problem with it. I have had to change the filter once to an upgraded dry filter.

Do you get the same HP and trq gains with the short ram set up? If not do you have any numbers for what they are?

Thanks in Advance

Tim.TRDSparks 10-07-2010 10:39 AM

I have a first gen XB and there wasn't much of a change in numbers between short ram and full CAI.

Last time I ran on a dyno the car was at 110 HP with headers, intake and exhaust.


All times are GMT -5. The time now is 10:12 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.